◆ Maximum working pressure: 600bar
Introduction To Pressure Switch
◆ If the header needs to return the pressure signal, use this pressure switch kit.
Maximum working pressure: 600bar
Setting value: 15bar (adjustable between 10-50bar)
Switch rating: AC 250V, 4A, DC 24V, 4A
Protection level: IP65
Temperature: -30℃ to +1000℃
Material: Brass ,Galvanized steel
◆ Remove the plug at the end of the header with a 10mm allen wrench. Check the O-ring in the header. Screw the pressure switch into the header. Connect the cable to the pressure switch. Connect the wires to the control panel. Close the switch (blue and brown wires) when the header is started. If the opposite function is required, the wires in the connector of pressure switch must be changed. If it is required to set different switch points, you can configure it at the pressure switch.
Since its establishment, KinFire Technology has a wide range of achievements in the fields of petrochemical...
520 Chang'an Road, Wujiang Economic and Technological Development Zone, Suzhou
Monday to Friday: 8:30 a.m. - 5:30 p.m
Copyright KinFire Technology (Suzhou) Co., Ltd. © 2020 By www.300.cn 苏ICP备20025859号-1